Thanks to Hydraskin, I’ve received a limited edition Apollo 18 laptop skin in conjunction with the upcoming screening of Apollo 18!
Brief description of Hydraskin: It is water resistant, reusable, scratch resistant, enables clean removal and can be applied on flat and curved surface.
The package comes with the laptop skin and instructions manual. In this blogspot, I’ll teach you how to DIY this laptop skin in 5 steps!
#1 First, wipe the surface of your laptop cover with a cloth to remove any dust or dirt.
#2. Turn decal to the back and measured the desired size of your laptop. The decal comes with a grid network, which makes easier to measure and cut the laptop skin.
#3 Cut away the extra length by following the guidelines to fit your laptop perfectly.
#4. Next, pull the decal slowly from one edge while holding the kraft paper.
#5. Align center of the decal with your laptop and place gently on the surface of the laptop surface. Hydraskins skin allow you to apply it without having to worry about air bubbles.
Hydraskin is structured to be reusable. When you decided to reuse the skin on other gadget, just gently peel out from an edge. if decal has stretched during the peeling, blow hot air onto the surface and the decal will return to original shape. Finally just slowly place the decal on the kraft paper or your other gadget while gently rubbing the surface.
And there you have it. Hydraskin on your laptop in 5 steps!
For more information, u can go to Hydraskin official web (http://www.hydraskins.com/) or their LIKE their facebook page. (https://www.facebook.com/hydraskins)
Don’t forget to check out upcoming Apollo 18! Be a part of history, be a part of Apollo 18.
